- Non disponibile
OM Power OM6BPF - Band Pass Filter
Ref: OM6BPF
Non disponibileOM6BPF
CHIEDERE QUALI SONO I TEMPI DI SPEDIZIONE
DESCRIZIONE GENERALE:
Il Band Pass Filter OM6BPF, è stato progettato per tutte le bande amatoriali onde corte da 1,8 fino a 29 MHz (escluse le WARC) per una potenza di 200W.
SPECIFICHE:
- La copertura in frequenza: bande amatoriali 1,8-29,7 MHz escluse le WARC;
- Design: 3 filtri risonatore;
- Potenza: 200 W in SSB, CW, RTTY, AM e FM;
- Impedenza di ingresso: 50 Ohm;
- SWR: Meno di 1,2: 1 in tutta la banda;
- Impedenza di uscita: 50 Ohm sbilanciato;
- Perdita di inserzione: molto bassa grazie a un Q altissimo, tarato a mano per le massime prestazioni;
- Metodi di controllo: automatico con Yaesu, Icom, Elecraft, OM amplificatori di potenza automatico, Band Decoder per dispositivi esempio microHAM;
- Alimentazione: esterna da + 12V a 15V;
- INDICATORI LED:
- Modalità automatica
- Indicazioni banda
- Modalità bypass
- Dimensioni: 210 x 75 x 320 mm (larghezza x altezza x profondità);
- Peso: 2,3 kg
Misure tipiche di reject in banda
MHz | max. loss (dB) | max. SWR | Crossband minimum loss (dB) | ||||
---|---|---|---|---|---|---|---|
1.8 | 0.25 | 1.1 | 3.5 MHz | 7 MHz | 14 MHz | 21 MHz | 28 MHz |
2.0 | 0.25 | 1.1 | 47 | 70 | 60 | 53 | 70 |
3.5 | 0.25 | 1.1 | 1.85 MHz | 7 MHz | 14 MHz | 21 MHz | 28 MHz |
3.8 | 0.25 | 1.1 | 42 | 46 | 60 | 55 | 50 |
7.0 | 0.3 | 1.15 | 1.85 MHz | 3.5 MHz | 14 MHz | 21 MHz | 28 MHz |
7.3 | 0.3 | 1.15 | 66 | 46 | 70 | 55 | 47 |
14.0 | 0.3 | 1.15 | 1.85 MHz | 3.5 MHz | 7 MHz | 21 MHz | 28 MHz |
14.4 | 0.3 | 1.15 | 80 | 62 | 41 | 38 | 60 |
21.0 | 0.4 | 1.2 | 1.85 MHz | 3.5 MHz | 7 MHz | 14 MHz | 28 MHz |
21.5 | 0.4 | 1.2 | 75 | 75 | 65 | 35 | 58 |
28.0 | 0.4 | 1.2 | 1.85 MHz | 3.5 MHz | 7 MHz | 14 MHz | 21 MHz |
29.7 | 0.4 | 1.2 | 80 | 90 | 70 | 47 | 27 |
Tipica risposta del filtro
160m band
80m band
40m band
20m band
15m band
10m band
General description of the Band Pass Filter OM6BPF
The Band Pass Filter OM6BPF is designed for all short wave amateur bands from 1.8 till 29 MHz (exclusive WARC – bands ) for 200 W power.
Specification of OM6BPF:
Frequency coverage: | amateur bands 1.8 – 29.7 MHz (not WARC) |
Design: | 3 resonator filters |
Power rating: | 200 W in SSB, CW, RTTY, AM and FM |
Input impedance: | 50 Ohm |
SWR: | Less then 1.2 : 1 across band |
Output impedance: | 50 Ohm unbalanced |
Insertion loss: | very low insertions loss due to High – Q capacitors, hand tuned for maximum performance |
Control methods: | Automatic with Yaesu , Icom , Elecraft , OM Power automatic amplifiers , Banddecoder for example microHAM devices |
Power supply: | External between +12 V to 15 V |
LED indicators: | Automatic mode Band indications Bypass Mode |
Parameters: | 210 x 75 x 320 mm (width x height x depth) |
Weight: | 2.3 kg |
Measured Typical Band to Band Rejection
MHz | max. loss (dB) | max. SWR | Crossband minimum loss (dB) | ||||
---|---|---|---|---|---|---|---|
1.8 | 0.25 | 1.1 | 3.5 MHz | 7 MHz | 14 MHz | 21 MHz | 28 MHz |
2.0 | 0.25 | 1.1 | 47 | 70 | 60 | 53 | 70 |
3.5 | 0.25 | 1.1 | 1.85 MHz | 7 MHz | 14 MHz | 21 MHz | 28 MHz |
3.8 | 0.25 | 1.1 | 42 | 46 | 60 | 55 | 50 |
7.0 | 0.3 | 1.15 | 1.85 MHz | 3.5 MHz | 14 MHz | 21 MHz | 28 MHz |
7.3 | 0.3 | 1.15 | 66 | 46 | 70 | 55 | 47 |
14.0 | 0.3 | 1.15 | 1.85 MHz | 3.5 MHz | 7 MHz | 21 MHz | 28 MHz |
14.4 | 0.3 | 1.15 | 80 | 62 | 41 | 38 | 60 |
21.0 | 0.4 | 1.2 | 1.85 MHz | 3.5 MHz | 7 MHz | 14 MHz | 28 MHz |
21.5 | 0.4 | 1.2 | 75 | 75 | 65 | 35 | 58 |
28.0 | 0.4 | 1.2 | 1.85 MHz | 3.5 MHz | 7 MHz | 14 MHz | 21 MHz |
29.7 | 0.4 | 1.2 | 80 | 90 | 70 | 47 | 27 |